Cuplok Verticals: Verticals are made out of 40 NWB' Class tube confirm to iS 1161/1239 Pair of cups are provided at 500mm c/c, but cups at 1000mm c/c are available on request. Verticals are available in standard size of 3.0 mtr, 2.5 mtr, 2.0 mtr, 1.5 mtr. 1.0mtr and 0.5, mtr. Unstandard sizes can be supplied on request.

Telescopic Prop: Telescopic spans is result of many years of experience in construction industry. Their ability to incorporate various length adjustment make them indispensable to construction industry. Advantages of telescopic spans Saving on time and cost by relating the use of the same section on the same job Quick and easy erection and stripping Single simple adjustment for lengthy of span Intermediate supports eliminated No loose parts to be lost Compact for storage and transport Stand rough site handling and reduce maintenance cost Eliminates cost of cutting and

Assembly of Beam Head Over Prop: Sizes Available: Bracing of props are required in both direction if extended beyond 3.5 mtr. bracing should be done with right angle coupler approximately at 250mm above prop nut. The safe working load of the props so braced would be 2500 kgs.

Cuplok Scaffolding: Cuplok System is a proven multipurpose system which can be used for all forms of access and support structure in all sector of the construction industry, shipbuilding, boiler maintenance and industrial maintenance . This system reduces erection and dismantling time above all other systems, reducing labour cost. it is safe, easy to use, handle and is maintenance free. Its unique nodal joint allows four components to be connected in one single action, which is not available in any other system. Versatile system for straight, curved and circular access

Base Plate with 150 mm Socket: It has a 150mm x 150mm steel plate, 6mm thick providing a flat bearing surface for load distribution from vertical supports. It has a 50mm high integral spigot and holes for use with sole plate.

Adjustable Base Plate: For use in undulating ground condition and where it is required for making up for height variations when used under supports. Available in 32 ∅ and 36 ∅ , variable length of 350mm and 450mm with adjustments by means of screw upto 275mm and 350mm respectively.

Swivel Coupler: A one piece load bearing coupler for connecting any two and scaffold tubes at any angle through 360 o pressed from high grade steel and checked for distoriton and slip.

Cuplok Ancillary Components: This Bracket is designed for supporting the formwork and scaffolding at slab edges they are available in two sizes of 1.5mtr and 1.0 mtr lift. It is located in cup joints.

Adjustable Fork Head: A heavy duty fork head (U-Head) which provides adjustment upto 350mm to meet a wide range of varying heights. it is designed to give substantial bearing area. It has a standad acme thread and available in 32 ∅ and ∅.

Beam Bracket: To support drop Beams, eliminating the need of extra rows of support under the Beams. The Beam Bracket may be located on top most cup joints.

Cuplok Horizontal: Horizontals, made out of 48.3 OD scaffold tube confirm to IS 1161/1239 with forged end blades welded at both ends to tube and are available in lengths of 2.5mtr, 2.0mtr, 1.8mtr, 1.5mtr, 1.25mtr and 1.0mtr.

Bridging Horizontal: The Bridging horizontal is provided to create a working space or platform where a clear span of over 2.5 mtr to 5.0 mtr. is required through the main scaffold run.

Scaffolding: Consists of rigid welded frame made out of 48.3 OD pipe in two verticals and two horizontal. The frames are connected by scissor (Cross) Braces made out of 25 NB / 20 NB Pipes through pin welded on frames and locked in position by clips. Excellent rigidly due to welded construction and cross braces No tools required for erection of scaffold and no loose fittings Ideal as access scaffolding and support staging Excellent as scaffold tower around hoists Available in: Cross Braces supplied to suit frame spacing of 2000, 1500, 1000mm c/c.

Fixed Coupler: One piece load bearing coupler used for connecting two scaffold tubes at right angle or 90 o pressed from high grade steel, checked for distortion and slip.

Adjustable Spans Weight are indicative Max. Bending Movement : 1040 kg. m. Max. Total Load : 2700 Kg. Tactor of Safety : 2 :1 No Intermediate Support to be Provided

Rigid welded frames connected by cross bracings. Excellent for tall height and Hoist Tower, Easy and fast erection. No tools for erection and no loose fittings. Supplied with 48.3 0.0. tubes for normal use and 60.3 0.0. for heavy loads. Heights: 2, 1.5 and 1 M Widths: 1.8, 1.25,900 M clear Inside Cross Braces in sizes to suit frame spacing of 2.5, 1.5 and 1 M.

Transoms ledgers with fittings at both ends lock into wedge housings or captive collars welded on verticals at 1000/500 mm/c/c to form scaffolding or staging. Erected like mechano with no error in spacing in both the directions. Main advantage of allowing change in working levels by removing and refixing Transoms ledgers at different levels without disturbing scaffolding. Easy and fast erection with only a hammer. No loose parts.

All Scaffold fittings confirm to IS : 2750 : 1968 Commercial Quality also available. Steel Scaffold tubes are 40 mm N.S. Mild Steel continuous weld conforming to IS : 1239 or 1161, grade YST 210. Supplied in random lengths of 4.5 to 6 m. or required cut lengths.

Right angle couplers 40x40 and 50x40 Swivel Couplers 40x40 and 50x40 Ex. Joint Pins Sparing Clip Adj. Base Jack 32 and 36 Adj. St. Head 32 and 36 Fix Base Plate Bracing Tubes

Varios sizes like - 2500x450mm 2500 x 300 mm 2500 x 230 mm 2500x150mm As per need Column beam shuttering pannel is made from 45 x 30 x 4 mm size fabricated angle and 2.5 mm thick steel sheet welded on it. On this pannel and its accessories are quoted by Red oxide, Enamel colour. Uses- By using this pannel column can be casted in scientific way. As per our need we can choose size of same pannel and fixing them by nut bolt and ways clip we can prepare Box. By supporting this box by p

Staging for Flat Slab and Beam Slab using vertical support of Props or Scaffolding of various types described in this literature, with Drop Heads on top in which Deck beams lock in to support slabforms provide advantage of removal of Deck Beams and Slabforms in 3 to 5 days, leaving support to slab in position, thus repeating it faster and reducing cost of staging. Adjustable jacks bases provide fine adjustment in height of staging and allow lowering while striking

Wallform system of steel shuttering comprises of standard panels manufactured out of 2.5 mm thick M.S. Sheets with slotted 45 x 30 x4 mm angle/M.S. Flat Frame and Stiffner, Channel or Heavy Duty Soldiers, and Tubes or Channel Walers. All these components are assembled together by four types of Clips of unique design. Soldiers supplied in 2.5 M and panels in 1.25 m. heights. For curved walls flexible panels are used instead of wall form panels. For single sided shuttering heavy duty soldiers used inst

Steel tubes used for inner and outer of Props are continuous welded and confirm to IS : 1239/1161, Yst210. Outer : 60.30 mm 0.0. Inner : 48.30 mm 0.0. Height: M Safe Axial Load: Kg.

Horizontals Ledgers Minimum projection of blades avoids damages in handling and uniform dimensions make the cup joint rigid. The simple robust design ensures that horizontals need no maintenance. Sizes Available : 2.5 M, 2.0 M, 1.5 M, 1.25 M, 1.2 M Other sizes as per party's requirement.