Intake and Exhaust Engine Valve are offered from a wide range of materials, such as: EN24(BS817M40), EN52(BS401s45), 21-4N(BS349S52) etc., made by metal gathering upset forging process and Bimetallic Valves are Friction welded. Various process like Chrome flash on stem, Satellite on seat and tip area, Nitriding/Tuftriding, are also offered.

Push rods are made from various material Forged. Steel rod. Aluminum. Tubes. For competitors required to run mechanical fuel pumps. Push rods are inlaid at each end with the same diamond hard material used successfully for lifters. They will not wear the cam or the rod. Our push rods for lifting the valves are made of .080 wall molly steel and are swagged at both ends for a precision fit int

Ameera Exports is the leading manufacturer of Rockers Arms for Most of the Automotive Applications. The Rockers Arms are manufacture from Investment castings, Forging, Spheriodical Graphite Ductile Casting ( S G IRON CASTING), High 30 Graded Casting, Aluminum Forgings. The Bushing of the Rocker Arms are made from High Graded Brass.

Ameera Exports is a leading manufacturer of Valve Guides for Petrol, Gasoline and Diesel Engine with QUALITY our main objective and which is the reason for our success in the valve guide business. We manufacture the Valve guide from the size range of 1" to 24".We manufacture valve guide for almost all size of Engine. Valve Guides are grounded to a surface finish of 0.80 Micro Ra on its Outer Di

Ameera Exports manufacture Valve Tappet/Lifters from Chilled Casting and Forgings of SAE 8620 Material as the requirement be. Tappets are manufactured on Special Purpose Machines Imported from Schufflers GMBH (GERMANY) which gives us the best result in terms of reliability and Dimensional Tolerance. We are giving the crowning on the wear face of the Tappet for 10 microns which is just a dream f