Sigma Mixer is used to mix soap noodles or soap chips with perfume, color and other additives.

The powder mixture has two spirally arranged ribbons on the shaft. The spirals are left hand and right hand. When mixture is rotating outer blade pushes the material in one direction and the inner blade pushes the material in opposite direction. This mixes the material more homogeneously. The mixed material is removed from the mixing chamber by rotating the blades such that outer blade pushes the material towards the outlet. The mixed material is then sieved on the sieving machine attached as shown in the picture. The sieving machine grinds oversized particle and breaks the lumps formed du

Soap molds as per drawing are available for different soap stamping press / machines. The soap molds are available in brass and SS for band less and banded soaps.

The duplex vacuum plodder is the machine which extrudes the final soap which suitable for stamping. The extruder screw of top noodle plodder takes the milled soap ribbons of soap from hopper and presses the soap as it tries to pass through noodle plate. There is a rotating knife which cuts the noodles as they come out of the noodle plate. The noodles fall in the vacuum chamber. The screw of the bottom screw binds the soap noodles under vacuum as the soap mass comes out under pressure from the mouth of the cone through the die. Extruder has a seamless pipe SS-304 stainless steel. Aluminum a

Foot Operated Soap Stamping Press/ machine with counter balance weight and seating arrangement for operator. Material - Stainless steel with Brass Casings for banded soap and for other soaps depending upon the shape.

Rotary Bar Cutter Material - SS-304 stainless steel The assortment of our rotary disc cutters is extensively used for cutting the bars that come out of the conical opening of the plodder. This machines cuts the bars equally and can be used in any size of plodder in any capacity.