Clevis Hook Our company offers a wide variety of material handling forgings which include hooks for cranes stods for chains and chain links. For these, commonly used materials are CK-45, 4140 and 20mncr5. We provide perfect end to end solution i.e parts are supplied with machining, drilling, surface protection & heat treatment. Various certificates are provided like tensile strength, hardness certificate etc.

Forgings For Tie Rod Ends & Ball Joints We offer a large range of ready to fit tie rod ends, ball joints, idler arms, pitman arms specially for American & European application. As we already supply to OEMÂ’S, we use the same raw material as prescribed by them for socket and ball pins. Apart from this, heat treatment plays a major part in the life cycle of suspension parts and as we have in house heat treatment all quality controls are strictly adhered to.

Stainless Steel Forgings We manufacture stainless steel forgings for tractor industry e.g. shifter bushes connecting rods etc.Also we are doing stainless steel forgings as well. Stainless steel forgings contain 10 to 12% chromium and provide great corrosion resistance to a variety of structures. In addition to offering high performance stainless steel forgings also provide a cost effective solution.

Upset Forgings Our upset forgings also called hot heading which is a process by which the cross Sectional size of a bar is increased either at an end or at some point along its length. It is done on specially designed upsetting machines using closed dies to control size and shape. We design and develop upset forgings such as axle, shafts as per buyer drawings and samples and also supply in machined condition after spline rolling & hobbing operations & Induction hardening.

Magnetic Particle Testing (Magnaflux) of our Products, We do 100/ magnetic particle testing of all products forged in our company, It is a Non-destructive test method of inspecting areas on or near the surface of ferromagnetic materials. The material is magnetized by passing current then iron powder is applied. The powder adheres to lines of flux leakage revealing surface and near surface discontinuities or cracks. Magnetic particle testing is used for both raw material acceptance testing and product inspection after forging. All the parts which are detected with Cracks are rejected a

Coining The process of applying necessary pressure to all or some portion of surface of a forging is to obtain closer tolerances or smoother surface or to eliminate drafts is called coining. Coining can be done while forgings are hot or cold and it is usually performed on surface parallel to the parting line of the forging. We produce wide variety of Critical shape parts and due to different Shapes & sizes Coining is required so we have installed two Hydraulic coining presses of Capacity 100 ton and 200 ton. This assures that proper relations are maintained between different dimensions a

Normalizing Normalizing is a heat treatment for ferrous alloys which are heated to App 100 F above the critical range holding that temperature for the required time (Soaking time) & Cooling to room temperature in air. We have state-of-the-art continuous fully automatic ISO thermal normalizing cum hardening & tempering furnace. All the parts after forging are normalized in this furnace. Proper Micro & Macro structure is maintained and cut section is checked in our own fully equipped Laboratory and for parts requiring hardening & tempering 100% inspection is done at BHN tester.

We are a trusted name in manufacturing U Joints which are available in different sizes as per international specifications or buyer drawings. The commonly used material for U Joint are 8620, 16mncr5, 20mncr5 etc. High quality steel is used for forgings of cross bodies and cross cups. Best Quality needle rollers are used with required degree of hardness that is 60 to 62 HRC. The major processes don