NTPL make Oil Test sets are available in Manual, Motorized and Fully Automatic models. Input Voltages for all the sets are by default 230 + 10% Volts, 50/60 Hz , single phase AC. However sets with other Input Voltages can also be supplied. Out Voltages available are 0-50KV/60KV/70KV/75KV/80KV/90KV/100KV & 120KV depending on the seletion of model. Mid point of the HV winding is grounded. Sets are provided with oil cell, electrodes, gauge etc. for manual & motorised sets. Stirrer is optional at extra cost for manual & motorised sets. Automatic sets are pr

Primary Current Injection Set. Series : PCNT2RSW Type : 2KA05V-3KA30sec "NTPL" make primary can be used to test heavy electrical equipment with a maximum efficiency at minimum cost, providing a convenient means of delivering, controlling and measuring a heavy current in a comparatively low voltage low impedance circuit. A set like this is ideal for routine testing of circuit breakers, current transformers with or, without ammeter and can be used for many other applications where a heavy current supply of short duration is required. Input : 415V,1 ph,(betw

Test Set SPECIFICATION FOR "NTPL" MAKE 30KV/100mA AC HIGH VOLTAGE TEST SET SERIES : AHVMNDR2 TYPE : 030K100m "NTPL" make AC High Voltage Test Set is suitable for Power frequency applied voltage test on transformers, motors, insulators, cables etc. The set is capable of giving continuously variable High Voltage from 0 to 30KV. Technical features Input : 230 Volts, single phase, 50Hz, AC. Output : Continuously variable from zero to 30KV AC. Capacity : 100mA Duty : Intermittent i.e. 5 minutes ON, 10 minutes. OFF. Output v

SPECIFICATION FOR "NTPL" MAKE 110KV/50mA AC HIGH VOLTAGE TEST SET SERIES : AHVMTOC2 TYPE : 110K050mTM "NTPL" make AC High Voltage Test Set is suitable for Power frequency applied voltage test on transformers, motors, insulators, cables etc. for which the test parameters are within the technical scope of output of the test set. The set is capable of giving continuously variable High Voltage from 0-110KV. Technical features Input : 230 Volts, single phase, 50Hz, AC. Output : Continuously variable from zero to 110KV AC. Ca

Complete Set Specification for "NTPL" make 200KV/250mA AC HV Test Set Seires : ACHVMTOC4 Type : 200K250m "NTPL" make AC High Voltage Test set is suitable for applied voltage test on Transformers, Motors, Insulators, and Generators of large size, Cables etc. for which the test parameters are within the technical scope of output of the test set. The set is capable of giving continuously variable High voltage from zero to 200 kV AC. TECHNICAL Specification Input : 415 Volts, ±10% AC, 3 Phase (Between two phase of three phase system), 50Hz ±5%