WATER SUCTION & DISCHARGE HOSES( ISI MARKED) Application The hose is heavy duty, robust in construction and used for discharging water at different pressures. The lining is of good quality natural with multiple, woven cotton fabric / polyester / nylon reinforcement, double wire embedded, having weather and abrasion resistant outer cover. Length 15 Meters (tolerance + 2% - 1%) upto 75 mm dia 7.5 Meters (tolerance + 2% - 1%) upto 250 mm dia 4.5 Meters (tolerance + 2% - 2%) upto 750 mm dia 3.5 Meters (tolerance + 2% - 2%) upto 1000 mm dia

WATER SUCTION HOSES Application The hose is heavy duty, robust in construction and used for discharging water at different pressures. The lining is of good quality natural with multiple, woven cotton fabric / polyester / nylon reinforcement, double wire embedded, having weather and abrasion resistant outer cover. Length 15 Meters (tolerance + 2% - 1%) upto 75 mm dia 7.5 Meters (tolerance + 2% - 1%) upto 250 mm dia 4.5 Meters (tolerance + 2% - 2%) upto 750 mm dia 3.5 Meters (tolerance + 2% - 2%) upto 1000 mm dia Working Pressure

OIL SUCTION & DISCHARGE HOSES Application The hose is having smooth and abrasion resistant outer cover for use with all grades of petroleum and blended products. The lining consists of suitable rubber compound resistant to petroleum products and cover made from an oil and weather resistance rubber compound. Length 15 mtrs. (Tolerance + 2% - 1%) upto 75 mm dia 7.5 mtrs. (Tolerance + 2% - 1%) upto 300 mm dia Working Pressure Hoses and available for working pressure 0.35, 0.7, 1.00, 1.5 mpa i.e. 3.5, 7, 10 & 15 Kg/Cm 2 . The test pressure bei

DREDGER SUCTION & DISCHARGE HOSES Application Hand Built "Soft Wall" Multipurpose, robust construction used for deepening of harbours and declogging of water ways as suction and discharge of sand and abrasive slurry materials. The rubbers lining is soft and abrasion resistant. Working Pressure Rubber Dredger Discharge Hoses are suitable for working pressure up to 14 Kg/Cm 2 and available as per customers' requirement and specifications. The proof pressure test is 1.5 times of the desired working pressure. Construction Lining - The inner lining being sof

SAND & GRAVEL -RUBBER FLANGED HOSES Application The hose is heavy duty robust in construction and used for suction and discharge of sand and water at a high pressures. The rubber inner lining is abrasion resistance of sand & gravel with woven fabric / nylon reinforcement and shall incorporate one or two galvanised wire helix embedded in layers of rubber compound. Length For hoses having 100 mm nominal bore the maximum length shall be 15 metres. Above 100 mm nominal bore to 200 mm nominal bore the maximum length shall be 7.5 metres. Above 200 mm to 300