Bottle Rotating Apparatus Supports 40 bottles of 10 ml each (other bottle sizes on request) Precise speed control from 5 to 50 RPM with soft start facility Forced air heating system with programmable temperature range from 30 degree C to 50 degree C 24 *7 continuous operation Impact resistance clear polycarbonate air bath withstands high temperature. Snap fitting of bottles for easy placement and removal

Four Basket Disintegration Tester Accessories Available: Three tube Bolus Basket for Disintegration Tester Guided Discs for Disintegration Tester Disc handling device Basket cover for Disintegration Tester Basket with 40 mesh Bolus basket with 1 tube and guided disc

Fixed Height Dissolution Tester Ideal for sustained and controlled release products 6 station dissolution tester supports USP 1,2,5,6 and intrinsic test methods Facilitates Staggered Start Shaft locking mechanism for positive engagement and wobble free opeartion Moulded water bath with sturdy top plate Precise individual vessel centering system which can be validated Automatic stirrer heights positioning for USP 1, 2, 5,6 and special height of 45 mm Password protected opeartion with 3-level security

Media Preparator(EMP-21) Deaeration, preheating and precise dosing as per latest USP/ FDA guidelines Dosing accuracy better than +-% as per USP/EP requirements Mobile unit enables movement in media to dissolution tester Multifunction single hose system for dispensing, aspiration, cleaning, rinsing and drainage Ergonomically designed nozzle with embedded switch for ease of operation Tank capacity 21 litres Processing volume 2 litres to 21 litres Programmable dispensing volumes from 200 ml to 4000 ml Dispensing rate 1200 ml/min Volumetric dispensing Virtually no dead vo

Suppository Disintegration Tester Built in slow water circulation in 12 litres clear Perspex water bath as per EP requirement The ESDT-3 tests the disintegration time of suppositories as per the latest EP 3 independent test stations perform tests simultaneously All test cylinders turn 180 degree automatically every 10 minutes Test cylinders turning interval can be programmed from 1 minute to 99 minutes Removal thermostat can be programmed to maintain temperature between 30 degree to 50 degree (+/- 0.5 degree) in the bath

Unique front loading system 10 degree tilt facility as per USP Programmable counter and timer Printer interface for test and validation report Variable RPM Single drum Can be connected with Mettler, Sartorius and Contech weighing scale

Bottle Rotating Apparatus(ERB-40W) Supports 40 bottles of 10 ml each (other bottle sizes on request) Magnetically coupled drive and precise speed control from 5 to 50 RPM with soft start facility. Programmable temperature in the water bath from 30 degree C to 50 degree C. Snap fitting of bottles for easy placement and removal. Robustly built clear polycarbonate water bath to withstand high temperatures.

Staggered Start Dissolution Tester Complies with USP, IP, Ph.Eur, JP specifications 8 station dissolution tester supports USP 1,2,5,6 and intrinsic test methods Ideal for sustained and controlled release products Facilitates Staggered Start Moulded water bath with sturdy top plate Precise individual vessel centering system which can be validated Automatic stirrer heights positioning for USP 1,2,5,6 and a special height of 45 mm Password protected opeartion with 3-level security Shaft locking mechanism for positive engagement and wobble free opeartion

Semi Automatic Disintegration Tester Complies with USP, IP, EUR specifications Disintegration time registration of each tablet Integrated stirrer, level sensor probe and temperature probe with thermal cutout Ergonomically designed basket for quick loading and easy to clean Basket park out from beaker Individual motor and timer with external probe for each basket Unique camless drive Print report of test results and validation Moulded bath with fliptop cover

Two Basket Disintegration Tester Illuminated bath for better visibility Programmable timer with alarm and Temperature controller External probe for beaker Temperature Validation Ergonomically designed splash proof panel Dual station unit Complies with USP, IP, EP specifications Snap-Click loading and swivel free basket movement

Dissolution Tester Complies with USP, IP, EP specifications Supports USP 1,2,5,6 and intrinsic test methods Ideal for sustained and controlled release products 8 stations with easy Snap-Fit shafts for paddles and baskets Vibration free system Moulded water bath with sturdy top plate Ensures wobble free operation Magnetically coupled water circulating pump for precise temperature control of the water bath Programmable wake-up for temperature control Precise individual vessel centering system Low evaporation vessel centering system 20 programmable protocols and 12 programmable samp

Features: Complies with USP, IP, EUR specifications Disintegration time registration of each tablet Integrated stirrer, level sensor probe and temperature probe with thermal cutout Ergonomically designed basket for quick loading and easy to clean Basket park out from beaker Individual motor and timer with external probe for each basket Unique camless drive Print report of test results and validation Moulded bath with fliptop cover

Deaeration, preheating and precise dosing as per latest USP/ FDA guidelines Dosing accuracy better than +-% as per USP/EP requirements Mobile unit enables movement in media to dissolution tester Multifunction single hose system for dispensing, aspiration, cleaning, rinsing and drainage Ergonomically designed nozzle with embedded switch for ease of operation Tank capacity 21 litres Processing volume 2 litres to 21 litres Programmable dispensing volumes from 200 ml to 4000 ml D

Variable speed drive No contamination of the fluid or pump Self priming and can safely run dry Positive displacement, no back flow Ideal for sheer sensitive, viscous, aggressive and corrosive liquids Instant Start/Stop and reverse facility

40 programmable protocols for washing cycles interface for PC connectivity and printer for cycle validation documents Washing chamber capacity-150 litres Hot Air Drying has double filtering process

Hardness measurement by load cell upto 500 newtons Units of measurement in N, kgf and lbf PC connectivity through RS232 port Programmable upper (T1) and lower (T2) tolerance limits Display of 10 test value and calculate the average of the memorised value. Accuracy of +- 0.5% of full scale Tablet size-2 mm to 28 mm Tester operates on rechargeable battery Printer (optional) Validation kit (optional)

Most versatile tablet handling system Precise tablet positioning by robotic arm Measures weight, thickness, diameter and hardness Data handling with new Tabstat Pro Windows software Contact free thickness measurement by laser Gentle handling of tablets by vacuum

Samples may be stored (glass tubes or unsealed/ sealed HPLC vials), automatically diluted if required and transferred to a spectrophotometer. Samples may be directly transferred to the Spectrophotometer The system offers additional functions such as media, replacement and HPLC vial membrane piercing. This configurable is only possible with the 8 channel Syringe Pump.

· · cGMP compliant machine. · Short Drying time · Sturdy structure · Uniform Drying at low temperature · Fan motor unit can be placed in remote area · 0.3 micron class 100 Hepa filter · Minimum handling makes it more Hygienic · Electrical heating · Inflating tube for filterbag sealing

Silicon oil cooled and heated shelves maintain high accuracy of the temperature uniformity control Unique electrically driven stoppening system easily seats 4 full shelves of vials. Stable and reliable running without any risk of contamination Four shelves with 200 X 250 mm shelf size. Total shelves area 0.2 sq m Double spacing devices supplied. Inter-distance of the shelves can be doubled from 68 mm to 136 mm to accomodate different vial size The smallest footprint for a shelf free dryer: L950 X W650 XH800 mm 4 kg Ice

# Adjustable cannulas (to comply with USP requirements) for manual sampling with Leur lock to attach syringes. # Pre-filters can be attached to the tip of the cannula to prevent coarse particles from leaving the media during sampling.

* Reduction in cost of raw process materials, rejection of bad batches before processing * Maintenance of the optimum formulation for the process concerned * Reduction in process costs * Maintain the quality and consistency of the final product * Investigating and maintaining the quality of dry mixes

# The ESDT-3 tests the disintegration time of suppositories as per the latest EP # 3 independent test stations perform tests simultaneously # All test cylinders turn 180 degree automatically every 10 minutes # Test cylinders turning interval can be programmed from 1 minute to 99 minutes # Removal thermostat can be programmed to maintain temperature between 30 degree to 50 degree (+/- 0.5 degre

# Portable unit # Tablet hardness measurement by load cell # Hardness measuring range upto 500 newtons # Battery operated (50 hours of continuous use) # Units of measurement in N, kN, Kg, Ibs and oz. # Accuracy of +- 0.5% of full scale # Tablet size-2 mm to 28 mm # Validation kit (optional)