'WJ' Cast Steel Pilot Controlled Metallic Diaphragm Type Pressure Reducing Valve with flanged ends to BS-10 Table 'J' are suitable for 350 psig (24.6 Kg/Cm 2 g) Max. working pressure at 425 o C Temp and are Tested to 700 psig (49.2 Kg/Cm 2 g) Hydraulic Pressure. These Valves are available in three reduced pressure ranges of 5/60, 20/80 and 40/125 on the down stream side.

'WJ' Cast Steel Globe Valve to BS-5160/DIN 2401, PN-40, Straight or Right Angle Pattern, 13% Cr SS(AISI-410) Trim, Outside Screw and Yoke Type, Bolted Bonnet, Integral flanges as per BS-4504 Part I Table 40/1/DIN 2545 PN-40. Raised Face. Body Tested to 60 Bar Gauge and Seat and Back Seat to 40 Bar Gauge Hydraulic Pressure.

'WJ' Cast Steel Gate Valve to BS-1414-1975 Outside Screw and Yoke Type, Bolted Bonnet, 13% Cr. S.S. (AISI-410) Trim, Solid Wedge Disc, Flanges as per BS-1560/ANSI-B 16.5. Raised Face are manufactured in CI.150 and CI.300 TEST PRESSURE CLASS -150-300 BODY HYD. - 30 Bargauge - 76 Bargauge SEAT HYD. - 22 Bargauge - 55 Bargauge AIR - 6.9 Bargauge - 6.9 Bargauge These valves have wide applications for high temperature & pressure pipe lines and are specially suitable for oil Refineries, Petrochemical Plants, Power Stations & other Industrial Plants.

'WJ' CAST STEEL GlOBE VALVES to BS-1873-1975 Outside screw and Yoke Type, Bolted Bonnet, 13% Cr. S.S. (AISI-410) Trim, plug Type disc flanges as per B.S. 1560/ANSI-B-16.5 raised face are manufactured in CL-150 and CL-300 TEST PRESSURE CLASS -150-300 BODY HYD . - 30 Bargauge - 76 Bargauge SEAT HYD . - 22 Bargauge - 55 Bargauge AIR - 6.9 Bargauge - 6.9 Bargauge These valves have wide applications for high temperature & pressure pipe lines and are specially suitable for oil Refineries, Petrochemical Plants, Power Stations & other Industrial Plants.

'WJ' Cast Steel Parallel Slide Blow off valves rack and pinion operated are manufactured with flanged ends as per BS-10 Table 'J' for maximum Boiler operating pressure of 350 PSIG (24.6 Kg/Cm 2 g) at 800 o F (425 o C) temp. These valves are tested at 700 PSIG. (49.2 Kg/Cm 2 g) hydraulic pressure.

'WJ' Cast Steel Accessible Feed Check Valve, Outside Screw, Yoke Type, Rising Spindle with 13% Cr. SS (AISI-410) Working parts, Bolted Bonnet, Flanged Ends to BS-10 Table 'J'. Suitable for Max. 350 psig (24.6 Kg/Cm 2 g) Working Pressure and 425 o C Temp. Tested to 700 psig (49.2 Kg/cm 2 g) Hydraulic Pressure.

'WJ' CAST STEEL Y-Type Strainers are manufactured with S.S. (AISI-304) Screen with flanged ends to BS-10 Table 'J'. These strainers can also be supplied with flanges as per BS-1560 Part-2 class 300 and BS-4504 Part-1 Table 40/1. These strainers are suitable for 350 PSIG (24.6 kg/ Cm 2 ) max steam pressure at 800 o F (425 o C) temp. and are tested at 700 PSIG (49.2 Kg/Cm 2 g) Hyd. Pressure.

'WJ' Bronze Globe Steam Stop Valve, screwed bonnet, inside screw, rising stem, with back seat having renewable stainless steel seat and stem, screwed female ends BSP Taper or Flanged ends to BS-10 Table 'H' hand wheel operated suitable for saturated steam lines upto 250 PSIG (17.58 Kg/Cm 2 g) and Max. Temp of 428 o F (220 o C) tested to 500 PSIG (35.15 Kg/Cm 2 g) hydraulic pressure.

'WJ' Bronze Spring loaded pop type safety valve screwed male ends to BSP Threads of flanged ends to BS-10 Table 'H'. Max Set pressure for these safety valves is 250 PSIG (17.58 Kg/Cm 2 g). These are manufactured in enclosed discharge and open discharge designs.

'WJ' Cast Iron spring loaded safety valve with 13% Cr. Stainless Steel (AISI-410) seat and stem are manufactured in Single Post as well as double post design. These safety valves are set at max. pressure of 150 PSIG (10.54 Kg/Cm 2 )

'WJ' Cast Iron Vertical inverted bucket type steam trap with Brass / S.S. (AISI-304) bucket, screwed female ends suitable for max. 150 PSIG (10.54 Kg/Cm 2 g) working pressure and 428 o F (220 o C) body tested to 300 PSIG (21.08 Kg/Cm 2 g) hydraulic pressure.

'WJ' Cast Iron Vertical Lift Check Valve Bolted Cover, with 13% Cr SS (AISI-410) Trim and having flanged ends to BS-10 Table 'H' are suitable for 13 kg/Cm 2 g. Max. Working Pressure and 428 o F (220 o C) Temp. Tested to 26 Kg/Cm 2 g Hydraulic Pressure.

'WJ' Bronze Sleeve Packed Water Level Gauge flanged to Table 'H' or Screwed male ends with BSP Taper Threads and with automatic shut off in the water arm. Suitable for 250 PSIG (17.58 Kg/Cm 2 g) Max. B.O.P. and Max. temp. upto 428 o F (220 o C) Tested to 500 PSIG (35.15 Kg/Cm 2 g) Hydraulic pressure.

'WJ' Cast Steel Lift Check Valve to BS-5160/DIN 2401, PN-40, Straight or Right Angle Pattern, 13% Cr. S.S. (AISI-410) Trim, Bolted Bonnet, Integral Flanges as per BS-4504 Part I Table 40/1/DIN 2545 PN-40 Raised Face. Body Tested to 60 Bar Gauge and Seat Tested to 40 Bar Gauge Hydraulic Pressure.