Very compact and modern in design. Foundation is not necessary as they are directly mounted on non-driving end shaft of the motor. It consist of Linear Plates (Brake Disc) with square hole at the center. One corresponding piece of square hub is supplied with the Brake. This hub is keyed to the motor shaft and the Linear Plate is Free on this hub. Normally Linear Plate is grippes between two discs

The Bearing Mounted Clutch is a "Normally Off" type Clutch. It has 2 basic of a coil and a rotor faced with friction material held to the stator by means of the bearing and the Armature plate. When current flows through the Clutch Coil, the Armature plate is attracted to he rotor with friction material thereby transmitting the torque and is released immediately due to a sinusoidal wave spring,

Fail safe disc brakes working on 24 V.D.C. also these brakes in other voltages i.e. 42,190 etc. In working they are more or less as per A.C. Disk Brakes only. Advantage of D.C. Brake over A.C. Brake is that they are compact in size. They being D.C. are sluggish in action and hence when continuous inching operations are there these brakes cause load on the motor. Hence they are ideal when number of

Equivalent to Siemens Germany Make. These 'EK' type clutches & brakes are multiple disc oil immersed (magnetic flux passing through discs) type clutches with slip ring. They are used specially in machine tools Like Milling, Lathe, Grinder, Boring machine etc. Dimensionally clutches and brakes are same. When slip ring is not provided it is used as a brake. Plug type brush holder is required to supp

These Electromagnetic Clutch are designed for high frequency start stop operations similar to type : CBC. It is supplied in an open condition. Enclosure and assembly are carried in situ at customer's site.

These electromagnetic double clutch unit are pre-assembled on a single shaft. It functions similar to Type : ECL clutches. It is incorporated in applications where variable speeds and reversing of drives are desired.