Brewery and Food Grade Hose Applications Manufactured with hygienic grade nontoxic rubber compound designed for multiple use in: Brew eries for conveying wine, alcoholic liquors etc. Dairy plants for carrying milk and other dairy products as also edible oils or any other food stuff from one point to another. Construction Technical Specifications

Flexible Hose Our Flexible Hoses or Low Pressure Hoses are manufactured from Nitrile based extruded synthetic rubber tube resistant to oils, gasoline, fuel oil, air, water, hydraulic and petroleum based oils, grease, mineral oil etc. and is in accordance with SAE-DIN-BS and BIS Specifications. Main Features Type of Hoses PLW: G.I. Wire braided tube for regular pressure and tough handling. Available in sizes for 1/8" I.D. to 3" I.D. PLCW: One layer of cotton braid, covered outside with G.I. wire braiding for additonal pressure. Available in size

Heavy Duty Hoses Designed for heavy duty water suction and discharge service, where rugged yet flexible hose is ruquired both for dewatering and delivery purposes during excavation fo mines, project construction, defloading operation and for handling sewerage, waste water and mud. Type of Hoses: Type 1-Hoses with rough bore, Type 2-Hose with smooth bore. If the liquids are non-corrosive and do not carry solids in suspensions, as in the case with muddy water, rough bore is used; in other cases smooth bore.

High Pressure Hydraulic Hoses 1/4” I.D. To 3” I.D. Single and double wire reinforced rubber hoses confirming/super seeding J-517 SAE 100 R1 and R2, Din 20022 IST, St/2SN St and En 853 specification with custom build fittings as per SAE, DIN, MANN, BS, IS, JIC etc. Standards.

High Pressure Hydraulic Hoses 1/4” I.D. To 3” I.D. Single and double wire reinforced rubber hoses confirming/superseeding J-517 SAE 100 R1 and R2, Din 20022 IST, St/2SN St and En 853 specification with custom build fittings as per SAE, DIN, MANN, BS, IS, JIC etc. Standards. Industrial Hoses Hand Built Hoses 2” to 12” ID max. Length 15 mt. For high pressure application, the end fitting/Flange can be fitted at the time of the hose moulding. Oil and Solvent Resistant Hoses 2” ID to 12”

PTFE Flexible Hoses We are supplying two type of PTFE flexible hoses. They are plain and corrugated PTFE hoses. Details of both the types are mentioned below. PST-3 (Plain ptfe hoses) Features Ptfe synterized resin smooth bore tube. The low thickness assures medium permeability values. It is very flexible and has agood resistance to impulse stresses. It has dialectical and fire resistance properties and reinforcement by single of stainless steel wire (SS-304) PTFE flexible hoses are capable of resisting low and high temperature between -70degree C to +260degree C for longe

Super High Pressure Hoses 1/4” I.D. To 2” I.D. Multi spiral hoses, 4 spiral and 6 spiral for super high pressure and high impulse applications. As per DIN 20023 4SH, 4SP, and SAE 100 R9, R10, R12, R13.

Stainless Steel Corrugated Hoses The stainless steel flexible hoses are avilable in stainless steel grades (AISI) 321, 316L, and 304 by forming consolution so that it may conveniently bend while remaining liquid and gas tight. The hoses of specific length as per requirement can be manufactured with the end fittings in flanged/threaded types. The flexible hose are available in bradings of stainless steel wire to take care of external damage and to increase pressure ratings. Construction corrguated metal hose made with close pitch angular corrugation from butt-welded tube can be rein

Steam Hose Pipe Confirming to IS:5122 (type I) and IS:10655/83 (Type 1) Application Recommended for use in steel mills, thermal plants, heavy engineering industries for conveying industries for conveying saturated steam at a specified pressure. Construction Lining Synthetic rubber compound, seamless, reasonbly smooth in bore, uniform in thickness and free air blisters, porosity and splits. Reinforcement Synthetic yarn braided or piles of natural or synthetic woven textiles or a blend thereof. Cover Cloth-marked finish, suitable rubber, compound resistant to

Thermo Plastic Hoses We have thermo plastic hoses for Pneumatic tool hose Super spray hose Welding Hose Super Rock drill hose Car Wahing Hose, and Heavy duty air/Water hose Typical Applications for these hoses are High pressure hydraulic High pressure gas and liquid transfers Chemical industries Rescue tools Measuring and control techniques Surface treatments (Paint spray applicaiton) Gen Working hydraulics Lubrication techniques Mining applications Offshore Applications Tu