Electrical Enclosures No Electrical Circuit Either Single Phase Or Three Phase Is Complete without Proper Earthing. The name Earthing is associated with Earth strips, earth plate, earth electrodes Proper fastening or welding Earth resistance Soil resistively. Unless all these are Stable and healthy the word Good Earthing will have no meaning or value. The appreciate why earth resistance must be low, you need only use Ohms Law: E = R x 1, where 'E' is volts, 'R' the resistance in ohms and 'l' the current in amperres. Example: A 10 HP Motor is connected to a 3-phase 440 Volt

Electrical Enclosures The Pipe-in-Pipe Technology concept involves two 'mild steel pipes one nested inside the other. Both the pipes are subjected to Hot Dip Galvanization: 80 - 100 microns on the outer electrode and 250 - 300 microns inside the electrodes. The empty space inside the electrodes is filled with a specially developed Crystalline Conductive Mixture. For uniform distribution of fault current an earthing electrode must be cylindrical in shape. The surface being circular the distance from the centre to any point is always equal. This facilitates uniform distribution of fault cur

Electrical Enclosures "Ashlok" earthing system comes with an ideal Back Fill Compound (B.F.C) which has all the qualities to enhance the ground material. It is a ground enhancing material. It is easily compacted and when water is added. BFC absorbs it fifteen times its dry volume, BFC consistently holds its own shape and adheres to any source it touches. These capabilities resolve the issues of compatibility of soil / rod contact that are crucial to an earthing system. There is no need to recharge the pit in normal soils. BFC is not soluble in water. It retains its moisture p

Electrical Enclosures The location of earth pit also contributes to earth resistance value to a great extent. Soil resistively will be high in a sloping landscape or in a land with made up soil containing rubbish, cement, stone chips, plastic materials, etc. or in hilly, rocky or sandy areas and in areas where there are obstruction like walls near the earth pit. Most Important: The earth pit must be provided with a chamber and cover, irrespective of the location, in order to protect the exposed terminal. The thermal must be covered with a coating of grease or petroleum jelly. The pit

Electrical Enclosures The location of earth pit also contributes to earth resistance value to a great extent. Soil resistively will be high in a sloping landscape or in a land with made up soil containing rubbish, cement, stone chips, plastic materials, etc. or in hilly, rocky or sandy areas and in areas where there are obstruction like walls near the earth pit. Most Important: The earth pit must be provided with a chamber and cover, irrespective of the location, in order to protect the exposed terminal. The thermal must be covered with a coating of grease or petroleum jelly. The pit