Roof Drainage and Accessories As the expensive building erected should be preserved to last forever, we also provide Gutters and down take pipes which collect the Rain water and transfer it without entering inside the building.

Pre Engineered Buildings These are based on PEB concept specially known for economical design and compactness because they yield to strength and stability with minimal thickness. These are the structures basically produced at the factory with high tensile steel material by collecting complete information of the shed/building (viz; Length, Width, Height etc.). The entire design of column, rafters and other accessories is based on International structural standards and involve high technical welding and quality production. The entire requirement is produced on modular basis in

Sheeting Roofing and Cladding Sheets Metal Scope offers the following profile for applications of roof & wall in the buildings Description of Sheeting Profile Al - Zn Sheet are available in both 315 Mpa and 500 Mpa yield strengths. Also available in different thickness on request. Providing and Fixing of Single Skin METAL SCOPE Profile, 1060mm Cover Width, 30mm Crest depth at 200mm c/c (with 2 rips at center of each gutter, 2 grooves on both side of every crest at the top of Stiffening adding aesthetic appearance ). Material has yield strength of 550Mpa. S