Case Maker Machine This Machine is used for glueing plastic cotted paper, common paper, clothes, paper, coats etc., only cold adhesives can be used. This machine can be used by two people at the same time and with different product to be executed. Features All rollers are made of stainless steel and several parts are made of brass. Uniform and precise glue film regulation by means of screws no special tools required. Pointed strippers separate the glued material from the glue roller The Machine is easy to operate with the help of semi skilled / unskilled labour. Sp

Three Hole Paper Drilling Machine Usually, drilling is the last operation on an otherwise finished product. This precision engineered and sturdily built machine ensures trouble free high volume and quick turnaround time. Features The machine comes equipped with three drill heads. The distance between these heads is adjustable. A geared motor with cam produces the electrical machine stroke for table. The return stroke is quicker. Drill spindles permit vertical adjustment approximately 3 mm of fine setting of the drills. The machine is stable and easy to operate. Machin

Case Pressing Machine This machine is used for the rapid pressing of book covers and for all lining of paper to chipboard, paper board to paper board etc. The material to be pressed is placed on the feeding table and made to pass between the rollers where it gets pressed and is delivered on the delivery table. Features Two solid rubbing rollers covered with rubber The pressure of the top rubber roller is adjustable Combined material thickness up to 88 mm can be pressed Delivery table height is adjustable The machine requires practically no maintenance. Specificati

Gluing Machine This is a two roller gluing machine for full-area application of cold adhesives to paper, cardboard and similar materials. The material to be glued is fed manually from the feed table and into the feed rollers, it is guided over the gluing roller and is glued from beneath. It is then picked up manually at the delivery end. Features All rollers are made of stainless and several parts are made of brass. The machine covers are also made of stainless steel. Uniform and precise glue film regulation by means of screws with knobs. No special tools required. The

Book Hinge Forming Machine This is a manual system fo preparing both the hinges of a cased-in book with the application of pressure and heat. Features Simple adjustments for different sizes and thickness of books Equipped with two plates with "V" shaped edges The temperature of these plates can be controlled in 3 steps viz. high medium or low. Specifications