Steel Rolling 4 Hi Cold Rolling Mills up to width of 200 mm to 1000 mm Key Features Gear boxes : Specially designed gear boxes as per requirement. Recoilers: Special recoilers are provided with a unique design of six segments, to provide an unbroken surface to the drum and enable us to coil thinner material upto .30 mm without any problem. Spindle couplings : The spindle couplings we provide are of special design called 3 Point Crowning. This feature enables us to reduce the wear & tear of the article joint pieces used in conventional designs to zero.

Cut to Length Line HR Cut to length lines Width 300 to 2000 mm & thickness range up to 1.60 to 6 mm thick. Width 300 to 2000 mm & thickness range upto 8.00 mm to 16 mm thick. Width 300 to 2000 mm & thickness range up to 8 to 25 mm thick. CR Cut to length lines W idth 300 mm to 2000 mm & thickness range from .30 mm to 3.00 mm Our cut to length line range provides an opportunity to the customers to choose from the designs for processing of HR Coils ranging from 300 mm to 2500 mm in width and thickness ranging from 1.60 mm to 25 mm in HR,

Continuous Line Pickling Environment Friendly : In Our Lines, the process sections feature special sealings of the tanks and an efficient fume exhaust and scrubbing system to ensure no release of acid fumes Turbulent Acid Bath : The pickling tanks are shallow tanks made of granite specially contoured to permit fast and trouble free threading. The specially arranged flow of acid in the tanks increases the rate of pickling by causing high turbulence of acid in the tank & thus enabling high speeds with low residence time & hence less length of the pickling tanks. P

Sitting Line HR Slitters Width range 900 mm to 2500 mm & thickness range from 1.60 to 6 mm thick. CR Slitters Width range from 200 mm to 2000 mm & thickness ranging from .30 mm to 3 mm While considering the designs of the recoilers we consider a few points Production: The production capacity can be customized as per the requirements of the customers. Edges burr: To control the quality aspect of the material it is very important to control the burr in the edges slitted Surface defects: It is greatly taken care provide features to avoid any surfa

Cut to Length Line HR Cut to length lines Width 300 to 2000 mm & thickness range up to 1.60 to 6 mm thick. Width 300 to 2000 mm & thickness range upto 8.00 mm to 16 mm thick. Width 300 to 2000 mm & thickness range up to 8 to 25 mm thick. CR Cut to length lines W idth 300 mm to 2000 mm & thickness range from .30 mm to 3.00 mm Our cut to length line range provides an opportunity to the customers to choose from the designs for processing of HR Coils ranging from 300 mm to 2500 mm in width and thickness ranging from 1.60 mm to 25 mm in HR,