Industrial Chassis Features 4U rugged heavey-duty steel chassis Three 5.25" and max. two 3.5" disk drive bays One 12cm ball-bearing fan (optional two 12cm fans) Supports 14-slot backplane or ATX M/B Hot-swap redundant power supply support Optional DC power modules Specifications

12 inch TFT Panel Computer Features 12.1" TFT 150nit SVGA LCD Intel® Socket 370 Celeron TM /Pentium® III System Board Resistive Type of Touch Screen One Half-size PCI Card Expansion Optional Variable System Stand or VESA FPMPMI ARM to Meet Customized Application Environment Optional PS/2 Type of Card Reader Module for PANEL 2003-370e Two 24V Cash Drawer Ports.

I 7022 2 Channel Analog Output Module Analog Output Channels : 2 Channel to channel isolation Output type : mA, V Output range : 0 to 20mA, 4 to 20mA and 0 to 10V 12-bit resolution accuracy : ± 0.1% of FSR Read back accurach : ± 1% of FSR Resolution : ± 0.02% of FSR Zero drift : Voltage output : ± 15uV / deg C Current output : ± 0.2uA / deg C Span temperature coefficient : ± 25ppm / deg C Programmable output slope 0.125 to 128 mA / sec 0.0625 to 64.9 V / sec Current load resistor 500W for internal power 1050W for external power Power P

Modbus Multiplexer EGW1-MB is a protocol converter designed for industrial applications where all equipment involved uses Modbus TCP, Modbus ASCII or Modbus RTU communications. EGW1-MB can connect PLC's, drives, temperature controllers, bar-code readers, vision systems, and any other type of serial communication industrial equipment. Features DIN Rail mounting, temperature-resistant Industrial Case. Modbus TCP, ASCII, RTU Protocols. Modbus Master or Slave. Baud rate: up to 115 Kbps. Digital I'O's controlled by Modbus. RS232/RS485/RS422 selection via software. Easy to inst

Ethernet to Serial, I/O, A/D and I2C converter [FMod-TCP (DB)] Ethernet interface ARP, IP, TCP & UDP, HTTP Web server Up to 19 Input/Output Up to 5 A/D converter One I2C bus One UART bus Integrated firmware -> Plug & Play