Damper Actuator:- We offer highly efficient dampers that provide minimum leakage and superior operation. These can be operated manually, electrically or on pneumatic actuator operations. It has extruded aluminum aerofoil blades that are enclosed in the frame in open condition. This facilitates direct mounting of the damper on a duct, louver, filter frame and other similar application that do not require the interference of blade.

3 Way Diverting Valve:- 3 way Diverting valves are available in Brass Body. 3 way Diverting valves could also be used for Water Line Distribution where space is limitation.

Diverting Valve:- Application : Used for 2 position, floating control of liquids either for mixing service or in systems requiring that the flow be directed from either of two inlets to a common outlet. Construction : Three way mixing valves with metal to metal seating or spring loaded packing. Constant total flow throughout full plug travel. Linkage provides with strain relief mechanism assuring tightest possible close-off without putting excessive strain on the motor. Actuator positions valve steam.

Water Flow Switches:- Water Flow Switches are available for use on Liquid Lines for Water . These are using premium grade material sourced from trusted vendors. The Water Flow switches is available in various specifications that can also be customized as per clients’ requirements.

Solenoid Valve:- Solenoid Valve are suitable for use in distinctive system for water and neutralized Brine. Available 2 way or 3 way 2 way sizes 15mm 5/8 to 50mm are in Brass Body, Screwed ends. 3 way 15mm, 5/8 to 20mm, 3/4 in brass and 25mm 1 To 100mm, 4 in C.I body. Satisfactory operation of valves depends on proper Even pressure differential.

Ball Valve:- RC Ball Valves are used in Water, Oil, Gas or with any other Liquid, Gas which is not injurious to Brass. These Ball Valves comes up to 2 dia. B.S.P. In Brass Body with Teflon Seating and Chrome plated Brass Ball and Spindle.

Industrial Valves:- We specialize in manufacturing industrial valves that are widely used in different fields such as steel, metallurgy, mine and more. These product act as an effective sealant and protects the machine from dust. Our comprehensive range of valves are available in variety of sizes to suit the varying needs of the clients. Applications : Industry, building technology, Heating Ventilation Air Conditioning, shipbuilding.

These valves are known for their highest performance standards, corrosion resistance and high efficiency. Valves are used in a wide variety of applications.

Pneumatic Operated Valves;- Application : Used for normally open, closed two position control of steam, liquids, air, oil brine or other non-combustible gases, heat exchange systems and as a power failure valve where tight shut off is required. Construction : Single sated, straight through globe body with high lift plug, spring loaded self adjusting packing. Pneumatic actuator is equipped with reinforced diaphragm. The diaphragm is enclosed in cast iron housing with spring assembly. Valves suitable for use with control air pressure of 5 PSI to 20 PSI.

These valves are known for their highest performance standards, corrosion resistance and high efficiency. Valves are used in a wide variety of applications.

Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet and 1 outlet or diverting with 1inlet and 2 outlets services. Available in C.I and G.M body for pipe dia. 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends. These valves are operated with an Electric Actuator.

We offer Industrial Valves these Industrial Valves can be availed as per the client's requirements.

Mixing Diverting Valve:- Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet and 1 outlet or diverting with 1 inlet and 2 outlets services. Available in C.I and G.M body for pipe dia 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends. These valves are operated with an Electric Actuator.

The RC 744 range actuators have been designed using Rapid Controls proven reliability in combination with the latest Technology. They provide a simple, cost-effective way of controlling quarter turn valves and dampers. The design meets Industrys need for a compact and reliable actuator, it is suitable for use in many areas where an IP65 enclosure is required, Though IP68 enclosure are also availab

Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet & 1 outlet or diverting with 1inlet & 2 outlets services. Available in C.I and G.M body for pipe dia. 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends . These valves are available with Electric Actuator.

Application : Used for normally open / closed two position control of steam, liquids, air, oil brine or other non-combustible gases, heat exchange systems and as a power failure valve where tight shut off is required . Construction : Single sated , straight through globe body with high lift plug , spring loaded self adjusting packing. Pneumatic actuator is equipped with reinforced diaphragm.