Gear Coupling: Flexion Gear Coupling is a powerful device to provide protection against negative effects of Axial, Angular and Parallel mis-alignments in Mechanical Power Transmission specially in high torque situations. Range Manufactured: Full Gear, Half Gear, Spacer, Floating Shaft and Brake Drum Couplings. Assembly Parts: Principal Parts of this Coupling is a pair of assembly of hubs having external teeth meshed with internal teeth of sleeve over it bolted together with an 'O' Ring on either side and a Gasket to take care of leakage of the lubricant used in the c

Pin & Bush Coupling: Pin-Bush Couplings are cushion drive type providing resilient drive transmitting torque through Pins fitted with rubber bushes which absorbs shock load, torsional vibrations and misallignment. These couplings are easy to instal as well as dismantle by withdrawing Pins. No lubrication is required. Their inspection can be done without disamntling them. Assembly Parts: A couplings consists of two C.I. Hubs and Pins fitted with rubber bushes. The drive is transmitted through pins fitted with bushes. Threated ends of pins are bolted with one hub and other en

Tyre Coupling: Hi-Tech Tyre Couplings, in a new sophisticated design are multi-directional and are used to neutralize parallel, axial and angular misalignments, end floats singly or in combination. It cushions shock loads, absorbs tortional and lateral vibrations and undesirable sounds are isolated. It works as a potent device to protect system from fatigue failure minimizing down-time. These couplings are easy to install. Since there is no moving part no lubrication is required. Their inspection can be done without dismantling them. Range Manufactured: Flexible Couplings,

Star Coupling: Hi-Tech Star Couplings are designed to meet the demand for low cost general purpose flexible couplings. These are very easy and quick installation couplins. For other details see catalogue. Hi-Tech HW Coupling consists of two hubs and one rubber star. Hi-Tech HW Couplings consists of two hubs, one rubber snap-wrap, one retaining ring and necessary screws and washers. Snap-wrap can be replaced without disturbing drive and driven. Hi-Tech HT Couplings consists of two hubs, T-Type Rubber cushions, one retaining ring and necessary screws and washers

Coupling: Hi-Tech HDC Diaphragm type flexible couplings are long life and multi-directional couplings and have high tortional flexibility. Typical applications includes locomotive drives, compressors, pumps, diesel Gensets etc.