CONSTRUCTION: Toothed Colloid Mill suitable for fine grinding, dispersing and homogenizing in a single operation. The mill consists of a SS 304 single piece casted body inside which is fitted the SS 304 Rotor and Stator grinding element. The material is fed through a SS Hopper and is forced between the Rotor and Stator where the material is sheared, dispersed, mixed and homogenized. The rate an

BALL MILL: Size From 500 Ml to 50 Ltrs Material Of Construction Mild Steel or Stainless Steel. Having Total Volume Capacity In Liters. Main Shell Will Be Fabricated In 12 Mm Thick Plate And Side Plate Will Be 15 Mm Thick And Further Supported And Stiffened With Mild Steel Heavy Duty Ribs And Backing Plates To Withstand Heavy Loads From Outside. Main Shaft Will Be 60 Mm Dia Located On Heavy-Duty Bo

TO MANUFACTURING AND SUPPLYING: 1 No. 7.5 HP High Speed Disperser with 1 HP Mechanically Motorized lifting arrangement for mixing materials of specific gravity ranging from 1-1.3. Premix Capacity 300Lt. BODY: The frame will be made from angles and will house the body casting, guide pipe. The base frame will be of 12mm. thick MS plates. The top frame will have the motor and the shaft assembly.

Sigma Kneaders comprises of a double ~U~ shaped container welded and machined together inside which rotate two ~Z~ shaped Sigma Blades in opposite directions at 2 different RPM i.e. 30/60 RPM. The clearance between the blades and the walls of the container are kept to the minimum to ensure maximum efficiency in the kneading and mixing action. The shafts of the Sigma Blades are fitted in bearing b