3 PC Flanged Ball Valve Features Sap Mark Cast Steel Ball Valves have been designed to meet the requirements BS 5351 / ASME B 16.34 / API 6D / API 608 / MSS SP 72 Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / API 6D / DIN End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607 / API 6FA / BS 6755-II Flexible tip seats compensate for wear and changes in pressure Blow out proof stem construction Antistatic devices ensure electrical continuity betwee

Forged Valve Features Sap Forged Steel Valves have been designed to meet the requirements of API 602 / BS 5352 / ASME B 16.34 Socket weld ends dimensions conforms to ASME B 16.11 Screwed ends dimensions conforms to ASME B 1.20.1 Outside screw and yoke construction The gland is of two piece self aligning type Back seat arrangement for Gate and Globe Valves Valves meet the requirements of fugitive emission level Shell Category B as per MESC SPE 77 / 312. Options For low temperature and cryogenic services (cold box and non cold box) extended bonnet as per BS 6364 avai

Gate Valve Features Sap Cast Steel Gate Valves have been designed to meet the requirements of API 600 BS 1414 / API 603 / API 6D / ASME B 16.34 Face to Face an End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 The stem nut design allows for the removal of the hand wheel while keeping the Stem and Gate in a fixed position Anti frictional Ball bearings are provided in higher sizes and classes The strength of Stem to Stem to Gate connection is

Globe Valve Features Sap Cast Steel Globe Valves have been designed to meet the requirements BS 1873 / ASME B 16.34 Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Anti-Frictional Ball bearings are provided in higher sizes and classes Outisde screw and yoke construction All the valves provided with backseat arrangement The gland is of self aligning two piece type Deep stuffing box The Seat-rings are shoulder seated type Dee

Swing Check Valve Features Sap Cast Steel Check Valve have been designed to meet the requirements of BS 1868 / ASME B 16.34 / API 6D-SIO14313 Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to AME B 16.25 The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body. The Body to Bo