Following are the other physical aspects of our cooling tower: Water distribution system is of Stationary Type with branch pipes and PP spray nozzles for Uniform distribution through out the Fill area. FAN is of axial flow type made of cast AL. Alloy FRP Bladed and is directly coupled to Electric motor which Saves from perennial headache of V-Belt / Gear Drive. FAN DRIVE MOTOR is TE, IP-55 weather proof, Class F insulation. INSPECTION / ACCESS WINDOW is provided for Maintenance and periodical checking of various Components of the Cooling Tower without Disturbing the

The equipment comprises Fills and Drift Eliminator which are of strong PVC Honey comb design for ensuring max heat transfer. Further, following are the other physical aspects of our cooling tower: Water distribution system is of Stationary Type with branch pipes and PP spray nozzles for Uniform distribution through out the Fill area. FAN is of axial flow type made of cast AL. Alloy FRP Bladed and is directly coupled to Electric motor which Saves from perennial headache of V-Belt Gear Drive. FAN DRIVE MOTOR is TE, IP-55 weather proof, Class F insulation. INSPECTION A

Our timber cooling towers are made through pine or chirr wood after properly seasoned and chemically treated with arsenic chromate so as to prevent from biting, fungus and termite etc. Components like Boiler waterproof plywood marine grade, asbestos, treated woods, ss or hot dip. Galvanized bolt and nuts are used in the timber cooling towers. Marine grade plywood is used for hot water chamber in timber tower. The water is distributed by even distribution nozzles by gravity so the cost of extra pumping does not arise. This tower has the following applications: Chemical plants Air co

Our cross flow cooling towers are for cooling gases before passing them through any dust collector or bag filter. It is suggested for places where gases with high temperature cannot be used. Its forced draft in the rectangular shape is used for gas cooling at high temperature. Following are its characteristics of our forced drafts: Can be easily installed and inspected Less noise Larger motor & fan shelf life as they are installed at the bottom of the cooler.

The dry cooling towers manufactured by us are used for high temperature applications. These towers are best for for generators, water cooled compressors, induction furnaces and for process colling. With less water consumption, it has other following advantages too: No scale formation Cleaning of Heat Exchangers not required Minimal movable parts that is fan and motor Less maintenance Rust resistant Idle for low temperature applications.

We are offering round shaped fibreglass reinforced polyester FRP counter flow towers. With features like strength, light weight and rust resistance, it provides longer service life. Our FRP towers are absolutely idle for equipment cooling, industrial process cooling and air-conditioning systems. These counter flow round FRP towers are provided in the range of 10 TR to 400 TR. These counter flows towers are one of the most efficient equipment and they specially suit for centralized air conditioning and are available with FRP basin.

Our bottle shaped cooling towers are very reliable and energy efficient used in process technology industry. In this kind of tower, the water is fed from the top in order to distribute effectively through full cone nozzles at low pressure drop. In the whole range of cooling towers, air inlet is covered with PVC mesh and plastic louvers only if required. For efficient production, the raw material used are PVC, FRP, Polypropylene and Galvanized steel. This bottle shaped tower is available ranging from 5 TR to 500 TR in Single Cell. Further, it has following advantageous features: Easily acc