These valves are known for their highest performance standards, corrosion resistance and high efficiency. Valves are used in a wide variety of applications.

3 way Diverting valves are available in Brass Body. These could also be used for Water Line Distribution where space is limitation.

Application : Used for 2 position, floating control of liquids either for mixing service or in systems requiring that the flow be directed from either of two inlets to a common outlet. Construction : Three way mixing valves with metal to metal seating or spring loaded packing. Constant total flow throughout full plug travel. Linkage provides with strain relief mechanism assuring tightest possible close-off without putting excessive strain on the motor. Actuator positions valve steam.

Water Flow Switches are available for use on Liquid Lines for Water .

These Valves are suitable for use in distinctive system for water and neutralized Brine. Available 2 way or 3 way 2 way sizes 15mm 5/8 to 50mm are in Brass Body, Screwed ends. 3 way 15mm, 5/8 to 20mm, 3/4 in brass and 25mm 1 To 100mm, 4 in C.I body. Satisfactory operation of valves depends on proper Even pressure differential.

RC Ball Valves are used in Water, Oil, Gas or with any other Liquid, Gas which is not injurious to Brass. These Ball Valves comes up to 2 dia. B.S.P. In Brass Body with Teflon Seating and Chrome plated Brass Ball and Spindle.

Applications : Industry, building technology, Heating Ventilation Air Conditioning, shipbuilding.

Features Reliability of single phase Thermally protected motors. Rugged compact enclosure providing environmental protection during plant construction and cabling. Positive travel limitation by externally adjustable mechanical stops. Potential Free Contacts For Open, Close, Trip status. Self locking electrical and manual drive.

These valves are known for their highest performance standards, corrosion resistance and high efficiency. Valves are used in a wide variety of applications.

Application : Used for normally open, closed two position control of steam, liquids, air, oil brine or other non-combustible gases, heat exchange systems and as a power failure valve where tight shut off is required. Construction : Single sated, straight through globe body with high lift plug, spring loaded self adjusting packing. Pneumatic actuator is equipped with reinforced diaphragm. The diaphragm is enclosed in cast iron housing with spring assembly. Valves suitable for use with control air pressure of 5 PSI to 20 PSI. Valve Body Specification

These valves are known for their highest performance standards, corrosion resistance and high efficiency. Valves are used in a wide variety of applications.

Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet and 1 outlet or diverting with 1inlet and 2 outlets services. Available in C.I and G.M body for pipe dia. 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends. These valves are operated with an Electric Actuator.

We offer Industrial Valves these Industrial Valves can be availed as per the client's requirements.

Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet and 1 outlet or diverting with 1 inlet and 2 outlets services. Available in C.I and G.M body for pipe dia 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends. These valves are operated with an Electric Actuator.

The RC 744 range actuators have been designed using Rapid Controls proven reliability in combination with the latest Technology. They provide a simple, cost effective way of controlling quarter turn valves and dampers. The design meets IndustryÂ’s need for a compact and reliable actuator, it is suitable for use in many areas where an IP65 enclosure is required, Though IP68 enclosure are also available. The RC 744 range is a single phase electric actuator which is available in two Versions, both with the IP65, IP68 optional enclosure. The standard version is suitable for open close duties wher

Application : Used for normally open / closed two position control of steam, liquids, air, oil brine or other non-combustible gases, heat exchange systems and as a power failure valve where tight shut off is required . Construction : Single sated , straight through globe body with high lift plug , spring loaded self adjusting packing. Pneumatic actuator is equipped with reinforced diaphragm.

Used for 2 position or Floating Control of liquids, either in mixing with 2 inlet & 1 outlet or diverting with 1inlet & 2 outlets services. Available in C.I and G.M body for pipe dia. 15mm to 250 mm. Valves up to 50mm are available with B.S.P screwed ends and above 65mm with flange ends . These valves are available with Electric Actuator.

High Torque Electric Compact Design Actuators are available for operating Butterfly Valves. Ball Valves, Gate Valves, Plug Valves or any other device requiring rotary applications with High Torque. These Actuators have a running time of 10-35 seconds for a 90 deg. Actuation and have a Thermal Protection Torque Switch. Also available in modulating version.

Self Adjusting Modulating Direct Mounting Actuator for use with Mixing /Diverting Valves for up to 2 inch with a Linear travel of 19 mm. These Actuators come with a range of inputs signals :- 4-20mA, 0-10V DC, S.P.D.T. Switch, Thermostat. Its basic features covers Field replaceable Jumpers, intelligent Circuit which could sense any Hindrance in the movement of the valve.