Tube Finned Radiators The range of tube finned radiator is manufactured from fin tubes assembled in header, hot/cold, liquid or gas flows inside tubes and air flows through fin. It has heat surface area of 500 m2 and heat transfer capacity of 3,00,000 Kcal / Hr.

Tube Finning Machine & Finned Tube Radiator Continuous Spiral (Without tube) Fin Coils are used for U shaped or any other odd shaped tube. These are widely used for industrial Electric Air Fin Heaters and Air Compressors Cooling Tubes. These Coils replace the old-fashioned washer type separate fins. Instead of putting separate one by one-single washer fin, they can put about 200 fins at a time, using Continuous Coil of fins. This can make more fin Heaters in lesser time, thus saving on labour cost substantially. Because of uniform spacing of fins with these Coils have a very appealin

Tube Finning Machine & Finned Tube Radiators We are manufacturing and offering tube finned machine and finned tube radiators that are fabricated from metals like MS, copper, SS & aluminum. These machines are used to make cooler, thermic fluid heat exchanger etc. Other specifications are as follows: Type : Spirally crimped, tension wound fins on tubes of MS, SS, copper, brass.& aluminum Purpose : To increase contact surface area of tubes for better heat transfer. Size : Tubes 8 mm OD to 100 mm OD Fin height 5 mm to 25 mm Fin pitch 2 FPI to 10 FPI.

Tube Finning Machine This machine works on the principle of Roto advancing mechanism of tube and fins that are crimped and highly tension wound around the periphery of tube. Its is provided with geared motor that has variable frequency drive for changing speed for various sizes of tubes. Two models are available with different specifications that are as follows: PTF- 40 suitable for tube OD 8.0 mm to 40 mm Fin height 5mm to 20mm Power:PTF-100:5 HP PTF-100 suitable for tube OD 25 mm to 100 mm Fin height 5mm to 25mm Power: PTF-40:2 HP Construction Base : M.S. fabricated with fo

We are exporter & manufacturer of Heat Exchanger. Floating Head type shell & tube type Two pass / Four pass in M.S. / S.S. & S.S. / S.S. Furnace area from 10 M to 600 M Evaporators & Economizer from 20 M to 350 M.