Fiber Management Systems - Rack Mount FMS / FDMS is used as intermittent point to terminate the two ends of bare fiber. The outdoor fiber cable is brought the Equipment room and a coil is kept in the fiber loop box (out side preview of this). The FMS installed provides fiber loop system in loose tubes or and provides fiber loop area, Splice Cassettes pigtails of appropriate length and fiber optic connectors. Part Code

Open Rack RI-OR-001 Specification Usability The basic usability of these type of rack are to mount the 19" standard equipment with lower depth or where temp / humility is not so much required, these type of racking solution are generally low depth racks, with a facility of cable entry and 19" mounting profiles, like DDF, MDF, Low Power Equipments, Modems, Networking Equipments and a lot more other equipments. Structure The basic structure of open racks are of three banding pillars or of 5 bending pillars along with Top / Bottom depending upon the customer requirement / feasi

Open Rack RI-OR-002 Specification Usability The basic usability of these type of rack are to mount the 19" standard equipment with lower depth or where temp/humility is not so much required, these type of racking solution are generally low depth racks, with a facility of cable entry and 19" mounting profiles, like DDF, MDF, Low Power Equipments, Modems, Networking Equipments and a lot more other equipments. Structure The basic structure of open racks are of three banding pillars or of 5 bending pillars along with Top/Bottom depending upon the customer

Cable Managers (RA-AS-006) Cable managers are used for proper laying and marking of cables in the rack, the cable managers are of 2 Sizes. 1U height cable managers 2U height cable managers.

Co-Axial Rack Mount DDF Different types of connecting panels are available for providing solutions for co - Axial, RF, RJ11, RJ45, Fibers. The type of connecting panels are available on 19 inch / ETSI Mountable Standards.