Degreasing Salts (Metal Cleansers) Chemsol Clean 111 : It is water soluble alkaline clearing powder. It effectively removes heavy to light duty grease, dirt & oil from the surface of the ferrous metals & their alloys at elevated temperature. Chemsol Clean 112: These formulations are based on alkalies with Non- Caustic properties. They remove grease, oil and dirt from all metals, ferrous & non-ferrous at elevated temperature. Different products are available to meet the crystal structure of phosphate coating needs. Chemsol Clean 112 SC : This is non-casuistic based

Derusting Compound Theses are phosphoric acid based compounds which removes rust from all metal surfaces. Chemsol RS 222 : This rust solvent is based on phosphoric acid & other acid composition with inhibition. It is suitable for dipping processes hot/ cold and can used for all types of mild steel components. Chemsol RS 223 : It is blended with special wetting agent & inhibitor for derusting medium to light duty rust from metal surfaces. Working temp. is 45°- 55°C Chemsol RS 224 : It is based on phosphoric acid with special wetting agent cum inhibitor. It contains oxidizing a

Activation Compound It is a blend of slightly alkaline titanium/ oxidizing compounds & activates steel surfaces and accelerates formulation of zinc-phosphate coating. Also accelerates the phosphate coating formulation process.

Phosphating Compound Chemsol coat 333G : This formulation is based on phosphoric acid, emulsifiers, corrosion inhibitors and Water soluble solvent. Used at room temperature of 300C- 400C. It gives a protective layer of iron phosphate on metal surfaces after removing light oil & rust. Chemsol coat 332 : It is used in hot phosphating process and gives a light, smooth & microcrystalline calcium and zinc- phosphate coating at working temperature of 6SoC- 7SoC. Chemsol coat 334 : This chemical gives a medium to heavy weight zinc- phosphate coating suitable for treatment in immersion

Corrosin Resistant Coatings These products are used for bare corrosion resistance. For sealing purpose suitable rust preventive oil issued on phosphated component. Chemsol Coat 335 : It is used in dip process & provides a heavy manganese-iron phosphate coating at working at working temperature of 80° C. WIRE DRAWING : The conversion coatings are available for drawing Mild­ steel, Alloy Steel and Carbon steel wire and yields an effective zinc ­phosphate coating. Chemsol Coat 349 : Provides a medium to light zinc- phosphate coating at appropriate temperature.