ESD Tester Wrist Strap Tester (Model: WST - 01) Wrist strap is the first line of defence against electrosatic charges builds up on the human body. It is designed to carry away this charge as soon as it is generated. At the same time wrist strap must remain electrically safe for the user. Thus, it is important to test every wrist strap regularly. In order to protect the sensitive electronic components the maximum wrist strap resistance should not be more than 10 Meg ohms on the other end, the resistance should not be more less than 0.75 Meg ohms as protection to the wearer f

ESD Station Monitor CONTINUOUS WORK STATION MONITOR (Model: WSM-01) The Model WSM-01 is designed to continuously monitor the connections of ESD wrist strap & work surface. WRIST STRAP: This section continuously monitors the wrist strap to detect loss of continuity between operator and monitor. Conditions such as broken coils cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistance return path from the wrist strap, it uses the “capacitive AC pulse principle” to check if the op

ESD Meter 100V SURFACE RESISTIVITY METER (Model: SRM-02) The model SRM-02 surface Resistivity meter is a portable, versatile, instrument designed to accurately measure resistance between two points, surface to ground, and surface Resistivity is accordance with EOS/ESD Association standard S-4.1. The Surface Resistivity meter (included TESTING & MEASURING PROBES) is designed to make all the measurements Specifications 100V LCD/LED SURFACE RESISTANCE METER MODEL: SRM-03 The Surface Resistivity Meter measures both surface resistance and resistan

ESD Static Meter STATIC CHARGE METER (MODEL: SCM-01) The Static Charge Meter is a non contact, low cost, light weight static monitoring and locating instrument. It utilises a centre-zero meter display to indicate the magnitude and polarity of the electrostatic charge. The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries. The unit gives direct readings of

ESD Absorber FUME ABSORBER (Model: FA-01) FUME ABSORBER is a compact, portable, self-standing, low noise unit which can be adjusted to any angle for maximum smoke absorption and is specially designed to suck the harmful fumes away from the operator which then gets absorbed onto an activated carbon filter. FUME ABSORBER is designed for table top operation. SPECIFICATIONS Common Ground Point Model: CGP-01 This simple system brings all the connections (2 Wrist straps, Work surface) to the same potential before grounding so that inter connection elect

ESD Products STATIC ALARM (Model: SA-01) The Static Alarm SA-01 is a portable, battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity. It is designed to provide a quick and convenient method of locating static charges. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby. The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handli