Door Frames Seccolor makes a range of doors and door frames out of Galvanized color coated steel (CCS), stainless steel, GI and CRCA. Panel Doors made of CCS/SS can be either partly or fully glazed. Laminated boards can be used as infill (fully or in part). Door Frames in CCS, SS, GI or CRCA are made in various shapes and sizes of sections with or without provision for gaskets, with various rebates depending upon the thickness of the shutter and with or without provision for Fly Mesh shutter.

Steel Windows "Seccolor" windows fabricated from roll formed sections made of galvanized steel colour coated, powder coated base steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq. mtr with total coated thickness of 0.55mm. Sections for shutter should be of 46x46mm and external frame should be of 46x52mm. Section for glass beading should be of 18x25mm and centre mullion should be of 46x70mm. Handle made of high grade aluminium powder coated and with nylon receiver. Gaskets made of ethyl propylene diamine monomer (EPDM). Corner brackets made of CR

Partitions Seccolor partition, Curtain glazing fabricated from roll formed sections made of galvanized steel colour coated/powder coated Base steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr with total coated thickness of 0.55mm. Sections for shutter should be of 46x46mm and external frame should be of 46x52mm. Section for glass beading should be of 18x25mm and centre mullion should be of 46x70mm. Handle made of high grade Aluminium powder coated and with nylon receiver. Gaskets made of ethyl propylene diamine monomer (EPDM). Corner brackets made of

UPVC Window Technical Properties Profiles All UNIQUE profiles are made from UPVC (Unplasticised Polyvinyl Chloride) & only those additives are used that are essential in producing sound extrusions in accordance to BIS 7413:1991 The main profiles shall be multi chambered, with a min. of three chambers The central chamber, being for reinforcement, shall be fully sealed when main profiles are welded at joints Water drainage path is in a separate chamber & does not affect the integrity of the central chamber All UNIQUE Profiles are tested regularly for Heat Revers

UPVC Doors UPVC (Unplasticised Polyvinyl Chloride) and only those additives are used that are essential in producing sound extrusions in accordance to BIS 7413:1991. The main profiles shall be multi chambered, with a min. of three chambers. The central chamber, being for reinforcement, shall be fully sealed when main profiles are welded at joints. Water drainage path is in a separate chamber and does not affect the integrity of the central chamber. All profiles are tested regularly for Heat reversion, Heat ageing, Impact resistance and weld factors in accordance to BS 7413:1991. Profile