METAL JACKETED GASKETS This type of gasket is used where complicated shapes are required and on smooth mating surface. A wide range of temperature & pressure is possible is possible as a large range of construction materials and styles are available. Construction comprises of a soft filler material such as Asbestos Millboard, C.A.F., P.T.F.E, Graphite etc. totally or partially enclosed in metal jacket. Metal jacket can be made of various substances such as: Soft iron, Copper, Nickel, Brass, Aluminium, Titanium, Stainless Steel etc.

SPIRAL WOUND GASKETS Spiral Wound are a versatile gasket used to compensate for joint  relaxation in cycling pressure & temperature variation. The construction is of V shaped metal and soft protruding filler material. This assembly acts as a spring and materials can be varied to handle a wide range of chemicals as well as steam. Compression is controlled either by the design of the flange containing the gasket or alternatively by an outside metal ring. An inner ring can also be fitted in high pressure applications for vacuum or to prevent media build up. It is mainly applied in Steam

PEARL 1000  The general purpose Gasket Sheet is made from chrysolite asbestos fibre and synthetic elastomers, for low and medium stress conditions and is suitable to seal off steam, water, air and various alkaline chemicals.  PROPERTIES & SPECIFICATION Tensile Strength : 7 MPA Compressibility : 6-14% Recovery : <=40%  Max. Internal Pressure : 35 kg/sq. cm.  Max. Operating Temperature : 380°C  Sheet Thickness : 0.25mm to 6.0mm  Sheet Size : 1.5m x 4.0m, 5.25' x 13.25', 1m X 1m , 1.5m X 1.5m 

PEARL XTRA  This grade of C.A.F. Jointing Sheet is made from chrysolite asbestos fibre and synthetic elastomers to seal off air, water, steam, natural gas, petrol, saline solutions, alkalies, ammonia and several other non-aggrasive media under medium stress conditions.  PROPERTIES & SPECIFICATION Max. Internal Pressure : 80 kg/sq. cm.  Max. Operating Temperature : 460°C  Tensile Strength : >=12.8 MPA Compressibility : 6-14% Recovery : >=40%  Sheet Thickness : 0.25mm to 6.0mm  Sheet Size : 1.5m x 4.0m, 5.25' x 13.25' , 1m X 1m, 1.5m X 1.5m

PEARL Beater Sheet is a medium density gasket material specially designed for Cylinder Head gaskets. It is mainly composed of blend of inorganic fillers reinforced with lengthy Asbestos Fibres in a nitrile binder matrix. it offers very good resistance to Oils & Fuels alongwith high resistance to temperature as high as upto 260 Degree centigrades. It is available in 3 different grades in Grey & Black Colours. Technical Data