Bi-05-200 is industry's first high productivity shock absorber/strut/front fork test system specially designed for use on damper production lines. Its features are Asynchronous dual station operation. Doubles productivity and provides ready cross reference on test results Compact single foot print packaging. Fully integrated system. Simply connect mains, compressed air and water cooling to operate the system. Ease of relocation on shop floor. Fully hard piped hydraulics. No flexible hosing Proprietry low noise, servo controlled pump for energy efficiency. All electrical

The Bi-00-201 series Plug n Play test systems are possibly the most cost effective solution to mechanical testing requirements for strength, fatigue and fracture in the 5 to 15kN force range of static and dynamic testing. These stand-alone test systems require no site preparation and no special utilities such as water cooling or even 3-phase supply. Just plug into the closest 15A mains socket like any other office equipment and the system is ready for use. These systems are ideal for colleges, R&D as well as industry users searching for low cost solution in material testing. Ap

Bi-00-101 Table-Top test systems are equipped with a T-Slotted base and overhead mounted servo hydraulic actuator. The frame, controls and display are located on the table. Application: Fatigue crack propagation; Fracture Mechanics; Room temerature as well as high temperature (1000deg C) tests; testing in corrosive environment; Tension/Compression; Low/High cycle fatigue tests (LCF/HCF); Damping force measurements; Elastomer testing; Quality control and R&D industries; Engineering Institutions

Bi-00-701 Axial Torsiontest systems are ideal for axial-torsional fatigue and fracture testing of advanced materials and manufactured components. These free standing systems are precision aligned and of adequate axial and torsional stiffness. Axial capacity up to +/-100kN Torsional capacity up to +/-1kNm Two column high pre3cision, high stiffness load frame Actuator in base or in upper crosshead to suit application Wide range of system options, grips, fixtures and accessories Optional capability for instrumented testing with up to 12 strain gauge channels Electr

BiSS has a range of servo hydraulic UTM from 5kN to 2000kN capacity. The load frame varies depending on the capacity from Plug & Play system to 4 column load frame. BiSS manufactures servo hydraulic actuators also. The range is from 5kN to 2000kN capacity, both double ended and single ended actuators. We manufacture hydraulic power packs from 4 LPM to 400 LPM capacity with air-oil, water-oil cooling system. Our power packs are energy saving types, i,e, it saves power. We manufacture our digital electronics controllers for the above. We can supply BiSS load cells, extensome

Bi-01-300 High speed damper test system supports a wide range of forces and velocitiesw up to maximum 6.5m/s employing the proven BiSS hardware and software. Standard Features: Force capabilities 25kN +/- 125mm stroke actuator Sustained velocity of 4.5m/s and peak velocity of 6.5m/s Standard T-Slotted base for easy mounting Up to 6 shock absorbers tested simultaneously water cooling facility for specimen Vibration isolated base Temperature monitor and control

Axial-Torsion Test System Bi-00-701 Axial Torsion Test Systems are ideal for axial-torsional fatigue and fracture testing of advanced materials and manufactured components. These free standing systems are precision aligned and of adequate axial and torsional stiffness. Standard features Axial capacity up to ±100 kN Torsional capacity up to ±1 kNm Two column high precision, high stiffness load frame Actuator in base or in upper crosshead to suit application Wide range of system options, grips, fixtures and accessories Optional capability for instrumented testing with u

Four Column High Force Test System Bi-00-100 free standing 4-column servo hydraulic tension-compression Universal Testing Machines, available in the force range of 500-2000 kN are used to perform a variety of tests on materials and components These test systems are robust and provide a wider testspace than most conventional systems. Standard features Fully self-reacting frame 500/1000/1500/2000 kN force rating actuators 100-500mm stroke actuator options Adaptable to wide range of fixtures & grips Spacious T-slotted testing bed Hydraulic lifts and clamps Actuator on top c

Panel Test Bi-00-100 Panel Test Systems were developed to accommodate the special requirements of large panel testing into conventional load frames. This is made possible through several special features: Hydraulic grips for 500 mm wide panel sheets of 0.5 to 5 mm thickness, rated to 200 kN Extra large vertical daylight (2500 mm). 12 channels of strain gauge / LVDT data acquisition. Airframe spectrum fatigue loading and residual strength testing capability. Standard Features 200 kN actuator rating +/-75 mm actuator stroke Actuator on fixed bottom crosshead Hydraulic lift

Thermo Mechanical Fatigue Test System Bi-00-702 Thermo Mechanical Test Systems simulate combined effects of thermal cycling and mechanical fatigue. These systems are useful for testing specimens subjected to synchronized heating, cooling and temperature compensated strain or force with optional expansion to simultaneous torsion or internal pressurization. These fully integrated test systems are available in the range of 50 to 500 kN force ratings and are ideally suited for aerospace and power generation industries. The specimen under test is subjected to extreme temperatures followed by

Two Column Medium Force Test System Bi-00-100 free standing 2-column tension compression Universal Testing Machines, available in the range of 25–500 kN perform variety of tests on materials and components.These test systems are very economical and easy to install. Standard features 0-100 Hz cycling frequency Hydraulic lifts and clamps 25/50/100/150/200/250/500 kN force rating actuators +/-100 mm stroke actuators Adaptable to wide range of fixtures & grips Actuator on fixed bottom crosshead Electronically servo-controlled variable flow, variable pressure, low noi

Ball Joint Test System BiSS Ball Joint Test System for durability and performance evaluation of ball joint system by subjecting the specimen to tilt, rotation and axial loads . Servo torque motor, servo hydraulic linear actuators, customized grips, fixtures, and transducers simulate the real test conditions with BiSS 2370MS controller Applications (as per JASO C 715, SAE J 193 and SAE J 1367) Oscillation angle test Torque test Rigidity test Extrusion and drawing strength test Ball stud static strength test Fatigue strength test Service temperature abrasive dur

CV Joint Test System Bi-00-603 BiSS CV Joint Test System for constant velocity testing as per SAE J 2028. The test setup evaluates the quality of CV joints by simulating the actual movements as in automobiles with BiSS 2370MS controller . The two mounting blocks bolted on the frame support a hydraulic motor and a torque load cell coupled with transducers for precision measurement and customized grips to hold the test specimen. The mounting blocks have provision to rotate (+/-45 degrees) and also to move to and fro adjusting to the varying lengths of specimen . Applications (as

Dual Station Shock Absorber Test System The Bi-00-303 is the industry’s first high productivity shock absorber / strut / front-fork test system specially designed for use on damper production lines. The Bi-00-303 is used to ensure that assembled parts meet specified performance specifications. The Bi-00-303 is the result of over seven years of R&D with a focus on harmonizing production line test requirements for 2, 3 and 4-wheeler suspension components. Individual features of Bi-00-303 have been tested and proven over this period by all major shoxproducers across the country. Pr

Elastomer Test System Bi-00-375 BiSS servo-hydraulic test systems are used for developmental testing and quality assurance of elastomers including engine and transmission mounts, bushings and other rubberized components, used to suppress noise and vibration. These systems assess vibration response at frequencies ranging from 0 to 200 Hz, displacements ranging from 0.05 to 15 mm and forces ranging from 0 to 25 kN. Production test systems automatically test parts for damping response over a specified amplitude and frequency. Standard Features Fully integrated single footprint sy

Steering Durability Test System Bi-00-605 BiSS Steering Assembly Test System evaluates manual and power steering assemblies for durability and performance at frequencies up to 50 Hz. The tests performed are in accordance with JASO C 717, IS 13476, JASO C717 and IS 14269. A servo hydraulic torque motor, two linear actuators coupled with customized grips and transducers are mounted on moving blocks and accommodate specimens of varying length that are subjected to lateral and steering loads. The whole system is integrated onto a free standing self reacting T-slotted table. Applications

Tyre Test System Bi-00-607 BiSS Tyre Test System evaluates both static and dynamic properties of tyres, including durability under constant as well as road simulation loading. The test system features two carriages with spindle assemblies and can test two tyres simultaneously. The wheel load is adjustable with maximum load of 100 kN applied through two servo hydraulic actuators . Tyres varying from 300 mm in diameter to a maximum of 1700 mm in diameter can be tested against a steel drum rotating at a speed of up to 300 kmph . System measures all forces and moments acting betwe

Makron Bi–00-101 Makron Test System is a single foot print assembly with an enclosure housing a controller and hydraulic powerpack. The Load frame with a T-slot bed and provision to mount actuator on top may be located on the top of enclosure. These systems are available in the range, 5–50 kN and provide the flexibility to perform static and dynamic tests. These systems are easy to install and usually do not require any additional utilities such as cooling. Standard features 0-100 Hz cycling frequency Flexible operation 5/10/15/25/50 kN force rating actuators +/-50 to 100 mm str

Nano Plug n Play The Bi-00-201 Series of “Plug ‘n’ Play” test systems are possibly the most cost effective solution to mechanical testing requirements for strength, fatigue and fracture in the 5 to 25 kN force range of static and dynamic loading. These stand-alone test systems require no site preparation and no special utilities such as water cooling or even 3-phase supply. Just plug into the closest 15 A mains socket like any other office equipment and the system is ready for use. Bi-00-201 systems are ideal for engineering colleges, R&D as well as industry users, searching

Bi-Axial Low Force Test System Bi-00-501 series include a biaxial load frame four servo electric actuator assemblies with built-in digital position sensors, load cells and the BiSS 2360 multi-actuator control system. The Bi-00-501 is specially configured to test "cruciform" shaped thin sheet specimens with or without notches such as cracks under biaxial loading conditions. The control hardware and software are designed to enable continued retention of specimen center position even in the event of non-uniform displacement on any one of the four tabs. This, along with the capability

Multi Axis Shake Table Multi-Axis shake table for durability and performance evaluation of automotive components and sub-assemblies.Digital control system for user friendly, repeatable and reproducible operation along with application software cover a wide range of testing requirements.Vibration inputs can be generated with up to six degrees of freedom (6DOF) either individually or collectively.The double ended, double acting, equal area servo actuators with swivel mounting on both ends isolate the piston rods from side loads and lateral accelerations.All actuators react vertically into the

Uniaxial Shake Table BiSS Uniaxial Shaketables are ideal for performing seismic simulation, solid liquefaction and vibration tests on models as well as for engineering qualification of components and assemblies for earthquake and vibration resistance. The table is designed with a natural frequency to exceed 100 Hz and the design also ensures that the c g of the test object can lie anywhere within the table and elevated upto 1000 mm above the table. The precision machined rails engage with the linear bearings and provide the linear horizontal movement. The system is powered by an electroni

Multi Actuator Test System BiSS Multi Actuator Control System is capable of controlling upto 8 actuators. It is a fully integrated mobile unit with an air-cooled hydraulic powerpack. It provides ease of access to all system components and has simple and unambiguous external connectivity. This extremely quiet operating system facilitates mil sockets with pin out markings to connect force and stroke transducers. Easy actuator connections possible with the quick release sockets available. The servo controlled pump incorporates thermostatic cooling, variable rpm control of pump speed, actuator m

Slit Burst Test Rig State-of-the-art technology to test pipes with through axial cracks subject to internal pressure Applications Structural integrity of pressure vessels Pressure vessels with through cracks Research on bi-axiality effects Research on size and shape effects Durability testing Service pressure history simulation Fatigue crack growth K-controlled testing, threshold studies Residual strength & fracture toughness ASTM E1820 including J1c Elevated temperature testing Standard Features Automated pipe-end sealing technology Double seals to ensure spill-free opera

Feature of 110LE Modular Test System : * Advanced 32 Bit Servo controller - 2370 * Micro mechanical Test Capability * Modular Mounting - horizontal & vertical * Open Source Software Platform * Force control - sub-gram to 6 kN (1350 lb) * Speed to 200"/sec (over 50 Hz) * Long strokes - matched to needs * Compact single column load frame * Load Cell matched to needs

Feature of 150L PC Based Test Table : * Virtually any mechanical test * PC Based Measurement & Control * Straightforward & Intuitive Design * Open Software Platform * Force, Speed & Stroke matched to needs * Load Cell matched to needs

Feature of 150P Horizontal Test Table : * For Tension and Compression Tests * Affordable & Configurable Tables * Easy to learn and use * Controlled Test Speed & Load Rate * High Resolution Test Data * Select Actuator Force, Speed & Stroke * Wide Selection of Load Cells

Feature of 800LM High Performance Test System : * Amazing 32 Bit Servo controller - 2370 * Micro mechanical Test Capability - 24 bit resolution * Open Source Software Platform * Rated for Static, Dynamic, Fatigue Tests * Force range sub-gram to 3 kN (675 lb) * Speed Range Static to 50 Hz * Load, strain, stroke control * Force, Speed & Stroke choices * Load Cells - 50 grams to 10 kN

Feature of Dual Column Modular Electromechanical Test Machine : * Tension & Compression * Multiple Force, Speed & Stroke Choices * Load Cells, Grips, & Fixture Choices * Choice of controller and software: Standalone P Controller - Entry level control and data acquisition * Optional post test data export & simple plotting software.

Compact frames rated to 7 kN (1,650 lb) - for tests on plastics, paper, adhesives, medical devices, electronics, food, etc. Capable of tensile, compression, shear, flexure, peel, tear, cyclic and bend tests.