The 'UNILAB' Twist Tester for yarns consists of a set of clamps, one of which is rotating and the other fixed. The rotating clamp is driven by hand through a speed increasing arrangement and a five digits re-settable revolution counter to count the number of twists. The fixed clamp is pivoted on jewel bearings and carries of a pendulum arm having a sliding weight to give the desired tension to the yam. The fixed clamp assembly can be moved over a guide bar for setting the required test length of yam which is indicated on a strip scale fixed to the base against a pointer attache

The UNILAB Digital Light Fastness Tester is used for determining the colour Fastness of textiles to Light using an artificial Light Source. (MBTL) PRINCIPLE -A test specimen of the textile together with blue wool standards is exposed under prescribed conditions to the light from a MBTL 500 W Lamp. The Colour fastness of the specimen is assessed by comparing its performance with that of blue light fastness standards. EQUIPMENT- The unit consists off a hollow cylinder of metal open at both ends with an internal dia of –18� & l

The ‘UNILAB’ Pilling Tester consists of two wooden cubic boxes with inside surfaces lined with cork and outer surfaces laminated. These boxes are rotated about their central axis at a specified speed with the help of a motor and a gear box. A ore-set stroke counter stops the motor automatically after the desired number of revolutions. The test specimens are firmly held around rubber tubes. Four such tubes are placed in each box and then rotated for desired numbers of revolutions after which they are assessed visually against standard rating photographs and grad

The UNILAB Tensile Testing Machine for yarns is suitable for determining tensile strength and elongation of yarns, cord, or thread having low breaking strength using the constant rate of traverse principle. In this equipment, one end of the test specimen is held in a grip attached to a load measuring device and the other end is held in a movable grip which is moved at a fixed speed with the help of a motor, belt pulley, worm reduction gear, and screw arrangement, thus exerting a load on the test specimen. An arrangement to move the lower grip manually is also provided. Capa

Unilab Bursting Strength Tester Used to determine the bursting strength of paper and other products with the following specifications- Pressure Range- 0-35Kg/Sq Mtr. Test Fluid- Glycerin Motor-1/2 hp single phase Gear Box-Worm reduction type Rate of Fluid displacement-95 cc/minute Upper Clamp Dia-35.5mm Lower Clamp Dia-38.1mm Calibration Certificate User Manual